Program

Biomedical Engineering/Orthopaedics and Rehabilitation

College

Engineering

Student Level

Master's

Start Date

7-11-2018 3:00 PM

End Date

7-11-2018 4:00 PM

Abstract

3D bioprinting is an additive manufacturing technique that can utilize a range of bioactive materials to construct specific architectures that mimic native tissue. Near-field electrospinning (NFE) offers precise alignment control to create non-woven mats with high tensile strengths. We built a custom E-spin printer that enables layer-by-layer alternating deposition between 3D bioprinting and NFE to create composite scaffolds for the bone-ligament interface. This complex region is difficult to simulate due to its functionally graded mechanical and biochemical properties. We created NFE poly(caprolactone) highly aligned micro-fibers which formed collagen fibril-like bundles. Poly(ethylene glycol) diacrylate with decellularized bone was encased in the PCL fibers to create bony ligament support structures in a composite scaffold. Cytotoxicity of all materials was determined through a Live/Dead assay (Thermo Fisher) with NIH/3T3 cells. The materials and the composite scaffold were seeded with 3T3 cells and cultured for three days before undergoing an immunocytochemistry staining (ICC) to assess cell adhesion and spreading. Increased adhesion and spreading on decellularized bone scaffolds along with cell elongation in the direction of the fibers suggests the ability of the scaffold to encourage osteoblastic differentiation and ligamentous tissue formation, though a longitudinal study is still underway. Mechanical results suggest that the composite scaffolds have increased compressive strength over PEGDA alone as the PCL fibers constrict horizontal elongation, thus yielding a higher compressive modulus. The PCL fibers demonstrated a tensile strength approaching native ligament (3.96 ± 1.10 MPa), which shows promise as the ligament phase of the scaffold. The E-spin printer’s versatility with materials of disparate viscosities enabled the layer-by-layer fabrication of composite (PCL/PEGDA+bone) scaffolds that begin to mimic the complex nature of the bone-ligament interface.

Share

Import Event to Google Calendar

COinS
 
Nov 7th, 3:00 PM Nov 7th, 4:00 PM

3D Bioprinting and Near-Field Electrospinning Composite Scaffolds for the Bone-Ligament Interface

3D bioprinting is an additive manufacturing technique that can utilize a range of bioactive materials to construct specific architectures that mimic native tissue. Near-field electrospinning (NFE) offers precise alignment control to create non-woven mats with high tensile strengths. We built a custom E-spin printer that enables layer-by-layer alternating deposition between 3D bioprinting and NFE to create composite scaffolds for the bone-ligament interface. This complex region is difficult to simulate due to its functionally graded mechanical and biochemical properties. We created NFE poly(caprolactone) highly aligned micro-fibers which formed collagen fibril-like bundles. Poly(ethylene glycol) diacrylate with decellularized bone was encased in the PCL fibers to create bony ligament support structures in a composite scaffold. Cytotoxicity of all materials was determined through a Live/Dead assay (Thermo Fisher) with NIH/3T3 cells. The materials and the composite scaffold were seeded with 3T3 cells and cultured for three days before undergoing an immunocytochemistry staining (ICC) to assess cell adhesion and spreading. Increased adhesion and spreading on decellularized bone scaffolds along with cell elongation in the direction of the fibers suggests the ability of the scaffold to encourage osteoblastic differentiation and ligamentous tissue formation, though a longitudinal study is still underway. Mechanical results suggest that the composite scaffolds have increased compressive strength over PEGDA alone as the PCL fibers constrict horizontal elongation, thus yielding a higher compressive modulus. The PCL fibers demonstrated a tensile strength approaching native ligament (3.96 ± 1.10 MPa), which shows promise as the ligament phase of the scaffold. The E-spin printer’s versatility with materials of disparate viscosities enabled the layer-by-layer fabrication of composite (PCL/PEGDA+bone) scaffolds that begin to mimic the complex nature of the bone-ligament interface.

 

To view the content in your browser, please download Adobe Reader or, alternately,
you may Download the file to your hard drive.

NOTE: The latest versions of Adobe Reader do not support viewing PDF files within Firefox on Mac OS and if you are using a modern (Intel) Mac, there is no official plugin for viewing PDF files within the browser window.